What are the Different Types of Garage Door Springs

Garage door springs. You may be familiar with them, but they are often overlooked by homeowners. Do you know that they are one of the most important components of your garage door and garage door opener? Your garage door springs allow you to conveniently raise and lower your garage door. Now that you are aware of their importance, it is time to pay more attention. So, what are the different types of garage door springs?

What are the Different Types of Garage Door Springs

A garage door repair tip is to inspect your springs often, which means they may need to be replaced eventually. Different spring options are available for garage doors. Typically, garage door springs are generally classified either as extension springs or torsion springs.

Extension Springs

As the name implies, extension springs store energy by stretching or extending. When the garage door is closed, more weight pan out the horizontal track, adding tension to the stretched extension springs.

What are the Different Types of Garage Door Springs
What are the Different Types of Garage Door Springs

Typically, a garage door has two extension springs, with each of them placed on either door side and running parallel to the horizontal track. Each of these springs provides independent tension. When dealing with a garage door with extension springs, you can take mechanical advantage of metal pulleys. Based on the types of ends, extension springs are further categorized into three: double-looped ends, open-looped ends, and clipped ends.

  1. Open-looped Ends: This type of extension springs is the easiest to replace, as it does not require opening the eyebolt or disassembling the pulley. One disadvantage, though, is that you need to change the entire spring even if it is just the part that is damaged.
  2. Double-looped Ends: An extension spring that is stronger than that with open-looped is double-looped ends. This type has two coils at the spring’s end that attach to the pulley and eyebolt. Although stronger, double-looped ends extension springs can be harder to replace.
  3. Clipped Ends: Clipped ends garage door extension springs are the most durable type among the three. The clips put the least stress on the spring, which is one factor that prolongs its service life. Clipped ends extension springs are the ideal and standard for 200-pound (or above) garage doors. The disadvantage, however, is that they are the hardest to change.

Torsion Springs 

Torsion springs are placed on the metal shaft directly above the garage door opening. Once installed, aluminum drums are positioned on either end of the shaft. The number of torsion springs to be installed on your garage door ranges from one to four depending on the door’s size (you need to know how to measure garage door springs), strength, and weight.What are the Different Types of Garage Door Springs

Unlike that of extension springs, the energy or force provided by every torsion spring is equally distributed over the shaft before it is carried to the drums. As a result, the cables spin at an equal rate and the garage door opens. Torsion springs have several types:

  1. Standard Torsion Spring: Typically used on residential garage doors, standard torsion springs are installed above the garage opening. Running through the middle and supporting the springs is the metal shaft. If you have a light garage door, one standard torsion spring is usually enough; otherwise, two is should be used.
  2. Early Set Torsion Spring: These torsion springs are placed in the mid part of the torsion shaft. A different type of hardware is installed on each end of the shaft, adjacent to the cable drums.
  3. Steel Rolling Door Torsion Spring: Usually used in commercial buildings, these torsion springs are set within the torsion barrel supporting the rolling door.
  4. Torque Master Torsion Spring: This type of torsion spring is considered the safest among all types. They are enclosed within the torsion shaft and are set in place by a winding cone found at the end of each torsion rod.

Questions

What are the Springs on a Garage Door?

Your garage door springs can either be an extension or torsion spring system, with the latter being the most common. Torsion springs are normally installed horizontally at the top of the door opening. As the garage door goes down, the cables connected to the door’s bottom corner causes a garage door spring winding direction.

Should you Replace Both Garage Door Springs at the Same Time?

It depends on the number of springs mounted. If your garage door uses two springs to pull it up, replacing both of them is a must even if just one spring is broken. Contact our team of professionals here at On Track Garage Door Service if you need any maintenance or repairs done to your garage door. 

How Long does a Garage Door Spring Last?

The average service life of a garage door spring is seven to nine years. However, the more you use your garage door – let’s say you use it as your front door, the higher the daily cycles will be, shortening the life span of your garage door spring to around four to six years. It is also possible that a garage door spring breaks after just a year, though it is very rare. While it’s possible to replace a spring yourself, it’s best to leave it to the professionals to prevent an injury from occurring. 

In Conclusion

Your garage door spring is an important part of your garage door, so it’s important to know what type your garage door has. Garage door springs can either be extension or torsion springs. Familiarizing yourself with each type will help you identify the appropriate one for your door. Not only will you learn what are the different types of garage door springs, but it will also give you an idea of how to tell if garage door spring is broken to prolong its service life.

Having Garage Door Opener Issues?

Replacing your garage door opener is an annoying and potentially costly experience.  That said, if you are experiencing problems with your garage door don’t give up on it too quickly as there may be steps you can take to remedy the issue before you decide to shell out a significant amount of money to outright replace your garage door opener.  You may only have a minor problem that isn’t very obvious. Here are two steps you can take to check your automatic garage door in the event that you are experiencing issue that interrupt it’s function.

Check the condition of your garage door:

The first thing you should check if you are having problems with your automatic garage door opener is the actual alignment of the garage door itself.  The best way to do this is to try and manually open the door. If you find it difficult or hear grinding then your door may be out of alignment with its track. This can not only produce annoying grinding noises, it can leave your garage door system damaged and unable to function properly. While it may seem easy to write off, noises produced by your garage door opener or track system that were not apparent in the beginning are telling you that something has changed for the worse.

Check the condition of the automatic door opener:

If you are able to open the door manually without issue then the next step is to check on the condition of the automatic door opener. Check to make sure all of the  lights are on before trying to operate the unit. If you find that the lights aren’t all on as they should be, check to make sure it’s properly plugged in and powered and check you circuit breakers.  If the lights are on and it is malfunctioning, try resetting the unit and unplugging it before plugging it back in and trying again. Often times resetting the unit will fix the problem, but if it doesn’t it may be time for a repair or replacement.

While simple in practice, these easy steps can prevent making an expensive and uniformed decision in a moment of frustration which could save you further damage, injury, and money. Taking the educated approach is always best, which is why we encourage all home owners to become familiar with their automatic garage door openers. You don’t realize how important your garage door opener is until you no longer can enjoy the proper use of it.

 

Don’t Let Your Automatic Garage Door System Get Hacked!

We live in an age where technology is advancing at a pace that most people can’t keep up with. This phenomenon has led to a knowledge gap between those in the know and those who aren’t that is absolutely MASSIVE. Hackers who have managed to stay on the technological cutting edge are able to access an ever increasing number of personal devices and information and they are finding more and more creative ways to exploit that information for their benefit. From computers to cell phones, almost all of your personal information is available to those who know how to get it and are willing to do so, but that is common knowledge. What isn’t commonly known is how much access hackers now have to your home with the advent of ‘smart’ homes and appliances that are wireless or remote controlled, which could grant them free entry to your home as well as access to your most precious valuables.

Your garage door is one of the appliances that you have that is at risk of being hacked and leaving your home exposed for vandalism and intrusion. This is especially true with older automatic garage door opener models which are easier to access with modified signals because they haven’t been equipped to combat modern technology and techniques.  Newer models of automatic garage door openers have safe guards against pirated signals and will be much harder to hack than their older counterparts. One example of the modern countermeasures in place is signal scramblers that constantly change the frequency that the garage door opener will respond to. The nature of these changes is random, which all but eliminates a hacking thief’s ability to manipulate your garage door in your absence.   It doesn’t take much for the older models to be hacked as you can see in this video in which a hacker hacks into an automatic garage door system with a child’s toy. If all it takes is a Mattel toy designed for children to be able to hack into your garage, most of us are at risk and should be majorly concerned about how easy it can be to have our homes breached. While upgrading your automatic garage door system may seem like a daunting investment, it pales in comparison to what will happen if your home is burglarized. That takes away not only your belongings and valuables, but also robs you of priceless piece of mind and feelings of safety and security.

Protecting your home and keeping your family safe requires knowledge of your home’s weaknesses as well as knowledge of what potential offenders are practicing.  They are always looking for ways around security measures in order to capitalize, stay ahead of them. Your garage is the most at risk part of your home when it comes to break-ins; protect it by arming your automatic garage door system with a modern opener that is resistant to pirated signals and frequencies. Keeping you and your family safe cannot possibly have a price and if your own an old garage door opener you are almost asking for someone to test it’s security capabilities.