What are the Different Types of Garage Door Springs

Garage door springs. You may be familiar with them, but they are often overlooked by homeowners. Do you know that they are one of the most important components of your garage door and garage door opener? Your garage door springs allow you to conveniently raise and lower your garage door. Now that you are aware of their importance, it is time to pay more attention. So, what are the different types of garage door springs?

What are the Different Types of Garage Door Springs

A garage door repair tip is to inspect your springs often, which means they may need to be replaced eventually. Different spring options are available for garage doors. Typically, garage door springs are generally classified either as extension springs or torsion springs.

Extension Springs

As the name implies, extension springs store energy by stretching or extending. When the garage door is closed, more weight pan out the horizontal track, adding tension to the stretched extension springs.

What are the Different Types of Garage Door Springs
What are the Different Types of Garage Door Springs

Typically, a garage door has two extension springs, with each of them placed on either door side and running parallel to the horizontal track. Each of these springs provides independent tension. When dealing with a garage door with extension springs, you can take mechanical advantage of metal pulleys. Based on the types of ends, extension springs are further categorized into three: double-looped ends, open-looped ends, and clipped ends.

  1. Open-looped Ends: This type of extension springs is the easiest to replace, as it does not require opening the eyebolt or disassembling the pulley. One disadvantage, though, is that you need to change the entire spring even if it is just the part that is damaged.
  2. Double-looped Ends: An extension spring that is stronger than that with open-looped is double-looped ends. This type has two coils at the spring’s end that attach to the pulley and eyebolt. Although stronger, double-looped ends extension springs can be harder to replace.
  3. Clipped Ends: Clipped ends garage door extension springs are the most durable type among the three. The clips put the least stress on the spring, which is one factor that prolongs its service life. Clipped ends extension springs are the ideal and standard for 200-pound (or above) garage doors. The disadvantage, however, is that they are the hardest to change.

Torsion Springs 

Torsion springs are placed on the metal shaft directly above the garage door opening. Once installed, aluminum drums are positioned on either end of the shaft. The number of torsion springs to be installed on your garage door ranges from one to four depending on the door’s size (you need to know how to measure garage door springs), strength, and weight.What are the Different Types of Garage Door Springs

Unlike that of extension springs, the energy or force provided by every torsion spring is equally distributed over the shaft before it is carried to the drums. As a result, the cables spin at an equal rate and the garage door opens. Torsion springs have several types:

  1. Standard Torsion Spring: Typically used on residential garage doors, standard torsion springs are installed above the garage opening. Running through the middle and supporting the springs is the metal shaft. If you have a light garage door, one standard torsion spring is usually enough; otherwise, two is should be used.
  2. Early Set Torsion Spring: These torsion springs are placed in the mid part of the torsion shaft. A different type of hardware is installed on each end of the shaft, adjacent to the cable drums.
  3. Steel Rolling Door Torsion Spring: Usually used in commercial buildings, these torsion springs are set within the torsion barrel supporting the rolling door.
  4. Torque Master Torsion Spring: This type of torsion spring is considered the safest among all types. They are enclosed within the torsion shaft and are set in place by a winding cone found at the end of each torsion rod.

Questions

What are the Springs on a Garage Door?

Your garage door springs can either be an extension or torsion spring system, with the latter being the most common. Torsion springs are normally installed horizontally at the top of the door opening. As the garage door goes down, the cables connected to the door’s bottom corner causes a garage door spring winding direction.

Should you Replace Both Garage Door Springs at the Same Time?

It depends on the number of springs mounted. If your garage door uses two springs to pull it up, replacing both of them is a must even if just one spring is broken. Contact our team of professionals here at On Track Garage Door Service if you need any maintenance or repairs done to your garage door. 

How Long does a Garage Door Spring Last?

The average service life of a garage door spring is seven to nine years. However, the more you use your garage door – let’s say you use it as your front door, the higher the daily cycles will be, shortening the life span of your garage door spring to around four to six years. It is also possible that a garage door spring breaks after just a year, though it is very rare. While it’s possible to replace a spring yourself, it’s best to leave it to the professionals to prevent an injury from occurring. 

In Conclusion

Your garage door spring is an important part of your garage door, so it’s important to know what type your garage door has. Garage door springs can either be extension or torsion springs. Familiarizing yourself with each type will help you identify the appropriate one for your door. Not only will you learn what are the different types of garage door springs, but it will also give you an idea of how to tell if garage door spring is broken to prolong its service life.

Garage Door Repair & Replacement Costs 2018-2019

If you are searching for garage door repair cost, On Track Garage Door Service can help you!

The average cost for garage door repair is about $223, with prices ranging from $147 to $341 for the US in 2019 according to HomeAdvisor. The most common garage door repairs include fixing locks, sensors, tracks, cables, garage door openers, opening and closing problems, and springs.

Popular queries include: garage door panel replacement, garage door panel cost, garage door panel replacement cost, garage door replacement cost, garage door panel replacement cost, garage door repair, garage door replacement panels, garage door bottom panel replacement cost, garage door repair cost estimate, garage door dent repair cost, garage door panels.

how-much-does-garage-door-repair-cost-in-2019-comparison-graph-infographics

How much does garage door repair cost?

average-garage-door-opener-repair-cost-infographic-graph-2019

Your garage door is one of your primary entrances to your home so you want to know that they are functioning properly at all times. If you are having complications with your current garage door, then you need to hire a professional garage door company to determine if it needs to be repaired or replaced. Included are the average garage door repair costs in 2019, for the United States. I’ve also included some garage door repair costs pictures, graphics and graphs that include high, low and average costs for garage door repair, installation and replacement costs. It also includes garage door part repair and replacement costs.

Garage doors are as common in apartment facilities as commercial and residential properties. Although, they may vary in size, style and costs to repair. Servicing your home garage door costs an average of $200 while accessibility, scheduling and working conditions at commercial businesses average $249 and $219 for apartment buildings.

Styles of garage doors

Depending on the style of garage door you select, some repairs might be harder than others. Single roll-up doors and single tile-up doors are by far the most affordable. Custom roll-up doors are more expensive and custom solid wood doors are at the top in price.

Material Needed for Garage Door Repair & Replacement

If you have one of the expensive models of garage doors, your repair & replacement costs are naturally going to be more expensive. The materials and parts for garage doors are usually made by the manufacturer of the door you bought.

Garage Door Openers

Most doors come with electric door openers. After a while these openers malfunction and need to be replaced. If your opener is broken, you’re in luck. These repairs don’t cost very much and can be replaced easily. You might even be able to do it yourself. Learn how to replace your garage door opener in 15 minutes https://www.youtube.com/watch?v=HeaR6Yhx6IY.

Finishing Your New Door

If you just installed a new door but your color doesn’t match the house anymore, then finishing or painting might be needed. It isn’t necessary but if you choose to add this on, it could increase the price of your repair or replacement.

How much does garage door pulley repair cost?

Garage door pulley’s are relatively cheap averaging around $12 – $68 dollars per pulley. However, you will have to make a service call for the repair expert to visit the home. A garage door service call is usually around $50 – $90 depending on the company you hire. Average garage door pulley repair cost is $102. 

How much does broken garage door torsion spring repair cost?

average-garage-door-springr-repair-cost-infographic-graph-2019

Before we even get started, let’s take a look at the difference between a torsion spring and an extension spring. Torsion springs can only be order from garage door companies on the internet, costs averaging between $40 – $100 each depending on the size. Whereas extension springs are sold at hardware stores where prices average $5 – $30 each.

If your door has two springs, most professionals and research online says that replacing both springs is the best option. Most torsion springs are rated for 10,000 close/open cycles. If only one of your springs is broken, both springs are still recommended to be replaced. Considering that your second spring will break soon anyways, this added on fix is only going to cost you about $50 extra to assure that you don’t have to pay another service fee for a second visit.

Labor charges for spring repair or replacement are usually $45 – $65 dollars depending on the company you select. The labor charge will be the same whether you change the one spring or both of them.

It you have a tilt-up door, you are looking at a $150 – $200 repair or replacement. If it’s a roll-up door it’s going to cost you more. Roll-up door spring repair or replacement is usually around $200 – $250 for a 2 car door. If the brackets need to be disassembled to remove the springs due to the shaft not sliding sideways enough it will cost you an additional $50 – $100.

For residents with automotive door openers, you can get an adjustment, motor cleaning and lube on your opener if you schedule the maintenance on the same visit as your spring repair. More information about the cost of repairing your garage door torsion springs. Learn more about garage door spring repair.

How much does garage door panel replacement & repair cost?

Garage Door Panel replacement Costs 2019

Garage Door Panel Replacement Cost

We lead busy and sometimes hectic lives. It’s easy for someone low on sleep and high on stress to accidentally bump into their garage door leaving a little damage. If you’re lucky it’s just an individual garage door panel that’s been damaged. This will leave you with the option of garage door panel replacement. There’s a chance it might cost you upwards of $150-200 to spot repair damaged garage door panel. If it happens to be an in-production model, they probably will be able to repair or replace the entire panel (if needed) for $250-400. Unfortunately if you’ve got an older model of garage door the panels may no longer be in production. This might seem like a disadvantage because you’ll end up having to just replace the entire door. Many times it’s actually easier and more cost effective to just replace the garage door. Read more about garage door panel replacement.

Garage Door Panel Repair Cost

Depending on the type and location of the damage you might have an alternative to replacing panels, or entire garage doors. One solution to give new life to your garage door is repair. Small dents, rot, rust or holes can be repair without replacing. Depending on what wrong with the panel, average prices for repair are $130 for steel door repairs, $190 for wood, $170 for aluminum and $150 for fiberglass. Garage door panel repair can save homeowners money, but should be weighed against garage door panel replacement.

Replacing or repairing garage door panels help the garage door operate properly. This means less headaches just trying to get through the day. In addition to ease of getting in and out of your home replacing or reparing garage door panels help preserve the value of the home. Curb appeal matters, especially if the home is going to end up on the market for sale. Any exterior improvement you do to the front of your home pays dividends in your curb appeal. That being said, garage door panel repair is one of the highest dollar fixes you can do for your garage door. The cost to repair the panel is directly associated to the repairman’s hourly rate. Installation of new panels start at $240 for a 9′ panel and $690 or more for a 16′ panel. If you are thinking about replacing your panels, think twice, you might be able to get a brand new garage door for about the same price. Check your options with your professional before replacing your panels.

More information on how to replace a garage door panel.

How much does garage door opener replacement & repair cost?

Garage-Door-Opener-Repair-Costs-2019.

Garage door opener repair and replacement costs about $200, with prices ranging from $50 to $350 according to HomeAdvisor.

Opener Types

Make sure that you get the right kind of opener for your type of garage door. Most openers have a weight limit and installing a opener that doesn’t support your weight could cause it to break. By selecting the right type of opener, you can avoid having to buy a new opener before the 10,000 cycles.

Maintenance for Openers

Make sure your tracks of your doors are greased and not squeaking. If they are squeaking it means you need grease. Add some as soon as possible otherwise you could risk having to replace the opener.

Remotes for Garage Openers

Have you tried to replace the batteries in your remote. That might be the problem. Batteries will usually be the first thing to go out. Try having your professional check that first before deciding to replace your opener.

Wiring of the Opener

Sometimes the wiring might go bad in your remote or your opener. It’s best to have a licensed electrician diagnose the problem before you have more major issues. It could be an easy fix due to the fact that most openers are not all that complicated and contain very few parts and wires. Learn more about garage door opener repair.

How much does garage door replacement cost? How much do garage doors cost?

 

average-garage-door-opener-repair-cost-infographic-graph-2019

Garage doors can cost $270 for a single door and up to $2,080+ for two doors or more with an average cost of $1,079 for full garage door replacement. .Keep in mind that better materials will cost more. This price also includes purchase of new tracks, adhesives, connectors and fasteners. You could install the door yourself but the weight of some garage doors are extremely heavy, so make sure you have help if you are trying DIY garage door replacement. Contact a professional or do research online to find out the average weight of different types of garage doors.

Insulation increases the efficiency of your door and can lower your electric will. You need R-value garage doors. These type of doors keep out hot and cold air and also provide a sound barrier between the outside and your garage. Insulated doors use polyurethane or polystyrene foam as insulation inside the door. More information about garage door replacement cost.

Safety Features to keep in mind when buying a new garage door:

  • Tamper Resistant (Safety Feature) – Brackets at the bottom reduce your risk of injury form other door components.
  • Pinch Resistant (Safety Feature) – If fingers are too close to the door, pinch resistance will push them out of the way.

How much does a brand new garage door installation cost?

average-garage-door-instalaltion-costs-2019

The average garage door installation cost is $862, with the low cost being $646 and the high being 1,078. Data was pulled from HomeAdvisor Members.

  • Carter door: Garage doors in Florida come with extra bracing on the back and are wind-loaded to protect against hurricanes. The average with is 350 lbs. but some can weigh as much as 800 lbs. It can cost up to $1,000 dollars to replace a steel two-car garage door and if it’s made of wood it can cost you up to $5,000 dollars. Some customized doors can be as much as 20 – 30k.
  • Edelen Door: These doors are carriage style doors and are designed to look like carriage houses but work like a standard garage door. Carriage house style doors cost around $2,500 dollars for a very nice door. Higher end wood carriage style doors can cost up to $7,000.

Cost Factors of Garage Door Installation

Average cost to install a garage door: $1,060
What’s involved in installation a new garage door:

  • Wiring and Electrical
  • Disposal and removal of the old door
  • Awkward and heavy lifting

It’s always a good idea to get your brand new garage door installed by professionals. Make sure and tell the contractor to include the removal cost of your old garage door, new tracks and any additional parts that might be needed.

The material and style of your door as well as the replacement parts needed will impact the total cost of your project. It would cost less to install a steel door with no opener then it would to install a wood door with an opener etc… High tech doors come with enery-effecient glaze and thick insualation as well as finshed interiors and other upgrades. These doors are more expensive but are more reliable and durable. Read more about garage door installation.

Can You Save money by Having a Locksmith Repair Your Garage Door Lock ?

Garage door lock repair can be done by locksmiths. Some garage door companies even offer garage repair coupled with locksmith services. Call you local locksmith today to find out if they can provide the repair you need. Their service fees are much cheaper and they have pleanty of experience with doors in homes and automobiles.

Garage Door Repair & Replacement Services In Phoenix, Arizona

Clearly there is a lot going on with your garage door and it takes trained and qualified experts to properly install, maintain, repair, and replace them. The experts and On Track Garage Door Services have the tools, skills, training to get your garage door fixed the first time. In addition we can help you fix your garage door affordably and offer many options from your basic garage door to custom wood styles. To find out how much your garage door repair will cost in PhoenixScottsdaleMesa, Chandler or anywhere else, give us a call at 480-641-2301 or use our Contact Page.

Garage Door Keeps Going Back Up

Your garage door should be secured and functioning well, as it is probably your home’s largest exterior opening. However, problems can eventually happen to any garage door. The most common question homeowners ask is why their garage door keeps going back up immediately after hitting the floor. There are a few reasons why this happens.

Garage Door Keeps Going Back Up

As with any other facility problems at home, there is no single reason why your garage door opens after closing it. If you are experiencing such an issue, check out the following possible causes and some garage door repair tips.

You Need to Replace the Logic Board 

Just like a computer has a motherboard, your garage door also has a logic board. The logic board is your garage door opener’s brain, and even with machines, a brain can wear out over time. A worn-out logic board can cause problems with your garage door, such as closing then opening again and vice versa. When this happens, you may need to replace it.

You Need to Adjust the Limit Switch Garage Door Keeps Going Back Up

Every garage door opener has a limit switch that controls where the door stops when it is lowered or raised. If your garage door won’t close all the way and keeps going back up, you may need to check the settings of your limit switch. You will need a flathead screwdriver to adjust it.

You Need to Adjust the Travel Down Setting 

The travel down setting of your garage door opener controls the distance the garage door has to travel before it completely closes. If it closes before the set distance is met, it may have detected something, so it goes back up to prevent damage or safety threat. However, your garage door components may sometimes contract and change due to weather changes. In this case, the distance may change. So adjusting the travel down setting to a new distance can fix the issue.

You Need to Check for the Presence of Any Blockage

If your garage door is hard to open or reverses immediately after closing, the simplest thing you can do is check the threshold for anything that blocks it. Your garage door will sense even the slightest blockage, which will cause it to go back up to maintain safety and prevent damage.

If, however, the threshold is clear and the other possible causes mentioned above did not fix the issue, it could be a whole other problem. Read the instruction manual of your garage door opener or consult a garage door service professional to help you.

Questions

Why Does My Garage Door Stop and Go Back Up?Garage Door Keeps Going Back Up

A garage door that stops and goes back up is usually due to malfunctioning infrared sensors. If there is such an issue, you can see one of the sensor lights blinking. Malfunctioning sensors can be caused by a blockage, dirty eyes, loose wires, or just bad sensors in general. This causes the transmitters to not function well in closing the garage door.

Why Does My Garage Door Go Up by Itself?

There are a few reasons why a garage door goes up by itself. Sometimes, it is because of a system power surge; other times, you simply need to change your garage door opener’s code. It can also be caused by a rogue signal that interferes with your receiver – a common scenario when a neighbor set up a garage door opener code similar to yours.

Why Will My Garage Door not Stay Down?

The most common cause of a garage door that won’t stay down is off limit settings. As mentioned above, the limit switch dictates the garage door when it is completely open or closed. If you set the down limit too far, it will cause the garage door to think that it has not completely closed when it hits the ground.

To Summarize 

Many homeowners treat their garage door as the main entrance to their house. Because of how frequently garage doors are used, it is essential to maintain it for your safety and security. You may encounter problems from time to time, such as when the garage door keeps going back up while trying to close it. There are a few reasons that can cause it, but if the above tips do not work, our team here at On Track Garage Doors Service can troubleshoot your garage to ensure it doesn’t go back up anymore.

Garage Door Repair Tips

Keeping your garage door in proper working condition is all about ensuring it’s well maintained. For instance, you want to perform an annual inspection to detect any issues before they start. Most maintenance steps can be done by the average DIYer, but hiring an expert allows you to have the added peace of mind that nothing is missed. It helps, therefore, to learn a few garage door repair tips.

Garage Doorgarage door repair tips Repair Tips

In this article, we’ll discuss a few basic garage door repair maintenance tips. These are basic tips for tasks you can do on your own.

Basic Garage Door Maintenance

There are several basic maintenance tasks that you should either do yourself or hire out on an annual basis. Performing a few simple checks will help to prevent the need for future garage door repair.

Check the Tracks for Dents and Other Forms of Damage

With a rubber hammer, you should be able to pound out minor bends and blemishes. In case there’s major damage, you’ll need to have the tracks replaced altogether.

Take a Look at the Sensors

If you’re having trouble opening your garage door, it may be due to a blocked photo eye sensor. We have included this video to show you why removing items away from the sensor can repair your garage door.

Make Sure the Tracks Are Level and Properly Aligned

If they’re not aligned or level, loosen the mounting brackets then tap the tracks. You want to ensure the tracks are level and aligned by adjusting them accordingly.

Wipe Out the Tracks

Clean and clear all debris from the tracks. Start by removing dirt and debris with a large paintbrush before deep cleaning with a household cleaner.

Lubricate the Pulleys, Tracks and Rollers

You can use household lubricating oil for the rollers, and powdered graphite or a special garage door lubricant spray for the tracks and pulleys.

Check All Fasteners, Nuts and Bolts

Inspect the entire system and tighten anything loose in the process.

Inspect Springs and Cables

While you should never attempt to fix cables and springs yourself, it’s advisable to give them a visual inspection at least twice a year. Look for any fraying or rust in the cables as well as any worn ends or rust in the springs.

Replace Worn Garage Door Seals

If the garage door bottom seals are due for replacement, you can do it yourself. It’s a simple process that should take you only about an hour. All you need to do is to get rid of the seal and reattach. Ensuring your seal is in good condition will help to retain heat and also protect it from water and the elements.

Professional Garage Door Repair

It goes without saying that there are several maintenance tasks that should only be done by a professional garage door service. If you’re experiencing problems with the built-in safety reversal features of an automatic garage door opener, for example, you should call a technician right away. Failing to address the issue can result in damage to your vehicle, and even worse, personal injury.

Bottom Line

With the garage door repair tips mentioned, you should have a well-functioning garage door all year round. Performing regular maintenance will help to minimize the number and cost of future repairs you’ll have to face. Should you run into any problem you can’t handle whether it range from repairs to replacing your residential garage door, be sure to seek the help of a qualified garage door specialist.

Garage Door Hard to Open

Do you often find your garage door hard to open? You are on your way to or from work, school, or that afternoon date with a friend, only to find out your garage door is acting up again. There are a lot of reasons why this happens, and you need to know the cause before you can address it effectively. Know how to deal with a garage door that won’t open easily with some tips from us.

Garage Door Hard to Open

There are many troubleshooting tips you can follow when your garage is experiencing problems. The following tips and techniques will not only help you fix the problem with your roll up door hard to open but will also teach you how to open those doors manually. So, let’s start.

Blocked Photo Eye

Older garage doors have a photo eye – a sensor placed about six inches above the ground, on the sides of the door. As small as a pea, the photo eye shoots a laser that detects if there is someone or something blocking the door. If your garage door is not opening, check if the cord connected to the photo eye is cut or damaged, especially after heavy rain. Cleaning the eye is also recommended as dirt and dust can obstruct the eye.

Broken Torsion Springs

There are signs you will see when your springs are broken. You will definitely know when the torsion spring of your garage door has just been broken – you hear a loud noise similar to that of a firecracker. Often, the garage door cable will also break which can damage a car or wall or hurt someone in the way.

Garage Door Hard to Open

The garage door springs are usually the first part to break and are the top reason for garage door repair services. For safety reasons, the first thing to remember when you have a broken torsion spring or cable is to NOT try to open the door. The repair should be done by a skilled professional.

Disconnect Mode is On

Garage door openers have a ‘disconnect’ mode (a cord, knob, or switch), allowing you to manually open or close the door. It does not take much effort to check if you have disconnected the motor by accident.

Disrupted Power Source

Simply check if your garage door opener is plugged into a working power source, or if your circuit breaker or fuse is working properly. This may sound simple, but it happens!

Locked Garage Door

After everything you have done and blurted out because of your garage door not opening, it turns out it is locked! Before getting really frustrated about it, simply check for any metal parts that may have locked the door.

Garage Door Hard to Open

Malfunctioning Remote Control

When using the remote to open the garage door but is not working, several things may have caused the problem, including:

  • You are out-of-range.
  • Check for any blockage or damage to the motor’s antenna.
  • If the garage door opens using the wall switch, replace the battery of the remote control.
  • Reprogram the remote.

Misaligned Door Track

An off-the-track door will surely not work properly. If your door is not rolling smoothly, investigate if the track is bent, the panel is dented, or has bulges or obstacles. Then, listen for any squeak that may indicate areas of friction and watch if the garage door slows down or gets stuck when it opens or closes.

 To fix a misaligned track, get a level and a rubber mallet and start to loosen the screws that keep the track secured to its frame. Lightly tap the track back to its correct position before tightening the screws. Alternatively, you can contact a dented garage door repair company for professional help.

 Presence of an Obstacle

As a safety mechanism, garage doors involuntarily reverse if they detect something along the way. When your garage door reverses halfway after opening it for no obvious reason, it may be a sign of an unseen obstacle. Look for dirt, pieces of trash, small rocks, or any other debris. Clean it thoroughly and you should be good to go!

Too Low or High Sensitivity

Too low or too high sensitivity of the garage door opener can also be the reason it takes effort to open the door. If this is the case, simply reset the sensitivity to the correct level following the manufacturer’s directions.

Opening a Garage Door Manually

To open your stubborn garage door manually, here is what you need to do:

  • Use a ladder to find the door opener’s ‘emergency disconnect’, which is the red cord attached to a lever.
  • Pull the cord so the door is released.
  • Get down the ladder and lift the door using both hands.
  • If it does not work, repeat yanking the red cord.

Questions

Why does my garage door get stuck?

A garage door sticking halfway can be due to an obstruction in the track. Look for anything like a broom or rocks that may have fallen and got stuck in the track. Removing the obstruction usually solves the problem.

Why is my garage door opening so slow?

There can be a couple of reasons why a garage door is opening slower than normal. It may be that the opener’s speed setting needs adjustment, or you have not lubricated the hinges, rollers, and tracks.

 A garage door hard to open can be annoying, especially if you are outside with the door your only way in. Before you can fix the issue, you need to know the cause first. Hopefully, these tips will help you. But if this is a persistent issue, contact our professionals here at On Track Garage Door Repair Service to help you. 

Dented Garage Door Repair

A dent does not look good on your garage door. It can be distracting from the rest of your home’s appearance. The good news is that you have options for dented garage door repair. If the dent is too big to repair, then you should be ready for a door replacement. Conversely, you can fix small dents to help your door look new again. 

Dented Garage Door Repair

This post will help you decide on what to do with your dented garage door. We will cover methods you can use to deal with all sizes of garage door dents. We’ll also discuss when you should seek professional help for the repairs. 

DIY Garage Door Repair

When the dents are rather small, you can straighten the door to look like it never picked a dent. Here are some methods you can use to deal with garage door dents at home.

Method #1

Start by gathering the materials you need. Paint and primer should be top in your list. Other resources you will require are rubber mallet, a patching material, putty knife, wooden block, and sandpaper with fine grit.  Dented Garage Door Repair

  • Begin by cleaning the dent. Use warm water and the ordinary household detergent. Let it dry completely. 
  • Put the wooden block directly on the dent. Hit the block with the mallet to streamline the dent. 
  • Using sandpaper, even the surface of the garage door.
  • Put the patching material over the dent. Use a putty knife to spread the patching material and cover the entire dent. Leave it to dry. 
  • Once it is dry, apply the primer and follow with painting the garage door

Method #2

For this method, you will need fewer materials. Arm yourself with an aluminum foil, a source of heat, and compressed air. Once you have all these, it is time to begin working on the dent. Dented Garage Door Repair

  • Just like in method one, you should begin by washing the dent. Use warm water and household detergent. 
  • Lay the aluminum strip over the dent. Make sure it covers the entire dented area.
  • Heat the foil evenly.
  • After heating the foiled portion for a minute, take off the foil. Get your compressed air and spray it on the area that was covered by the foil for 30 seconds. Spray it in an upside-down tilt. 

Call a Professional

Some dents will need more than your DIY skills to be removed. This is when you should call local garage door repair professionals. They will be able to use the proper methods that are more efficient than a DIY.

In Conclusion

There are plenty of options when it comes to dented garage door repair. Whatever method you use depends on the intensity of the dent. If you are unsure of what to do, it’s best to let the professionals remove the dent. Whether you need a new garage door or yours needs some repairs, our team here at On Track Garage Door Service is here to take call of all your garage door needs.

Choosing The Best Garage Door Openers in 2017

Choosing The Best Garage Door Openers in 2017

The best products in our lives are those that we buy, install, and never have to worry about again. Choosing carefully will help homeowners in Phoenix get years of hassle free service from their garage doors. This article is dedicated to helping you know how to choose the best garage door openers in 2017.

Premium garage door openers are those that offer features like a timer that simply shuts the door for you after a certain amount of time, or even has a backup power source. While every garage door will do the job, the difference is how much noise they make, how quickly they work, and how long they will last. They are designed for that one touch operation all of us demand, but follow the guidelines in choosing a new garage door opener below to get years of worry free service.

Garage Door Opener Design

Wireless garage door openers have various ratings for weight and have horsepower ratings to go along with that. For standard aluminum doors we have found that a wireless garage door opener with 1/2 Horsepower is the best option for these lighter weight doors. For heavier garage doors that are made of wood a garage door opener with 3/4 horsepower is more appropriate. Either horsepower rating is capable of opening a 7 foot tall garage door. If your door is taller than 7 feet there are extension kits that can be installed by your garage door service company.

The highest quality heavy duty garage door opener are those that are forward facing and constructed to work seamlessly with your home’s automated systems. The best of these garage door openers typically offer backup power, so it still works if there is a power outage. In addition they will have auto close features and even smartphone control integration.

Garage Door Opener Security

The security of your garage door is usually a very important part of your home’s overall security. Many times there is a door leading straight into your house from the garage. Most people also store many of their valuables in the garage door, mostly notably your vehicles. They are a large investment and keeping your home secure is serious business. This is why the best garage door openers feature rolling codes that help prevent would be thieves from capturing and mimicking your garage door opener code.

Garage Door Opener Safety

Just about any garage door is heavy enough to really hurt or kill someone. This makes safety priority #1 in every home. The safety features on your garage door opener are designed to save lives by detecting objects in the garage door’s path and automatically stopping, and reversing back up. There are edge sensors that can “feel” if the garage door has hit something, which will auto reverse the door. There are also infrared beams that watch for pets, kids, or objects in the path of the garage door which can stop and reverse the door.

Quality Garage Door Hardware

While simply pushing a button seems like it would be the as easy as opening your garage could get there are some designs that offer keyless entry, smartphone integration, and even multiple remotes. Keyless entry pads also make it easy to take the bike out for a ride without having to remember your keys or a remote.

Nighttime lighting is also one of the factors that make some garage door openers better than others. Most all garage door openers have 1 light, but the best have both forward and reverse lights that provide clear lighting to see if there are objects lying on the floor, or intruders hiding in the shadows. These light features have adjustable time limits that can be customized to fit each person’s wishes.

An Example Of The Best

The best garage door openers are like the Liftmaster Model 8557W. This garage door opener features a 3/4 horsepower motor paid with belt drive technology. Belt drive garage door openers are famous for quiet operation. Along with these factors Model 8557W is equipped with MyQ® technology which enables your smartphones to act as your remote, and to check to see if your garage door is open from wherever you are. You can even activate alerts to let you know when your garage door is opened or closed. The MyQ® app for your tablet, smartphone, or laptop is free to download, and free to use.

The security and safety on the 8557W includes the rolling codes where every time the garage door is used a new code is sent to the remote, protecting your home. The door also features a locking mechanism that protects against someone trying to force the door open. An alert system also warns with sound and light when the auto close or MyQ® features are going to close the door. Along with all this a motion detector helps light the garage when someone walks into it. Lastly it also features the invisible beam which watches for pets, people, or objects passing through the garage door’s path.

Phoenix Garage Door Openers

If your garage door opener has seen better days our technicians will do everything they can to repair what you have. If it is beyond repair, or you simply would like to have a newer garage door opener that is outfitted with the latest technology we have a wide selection of chain, belt, and even jackshaft (side mount) garage door openers. Give us a call today at 480-641-2301.

Adjusting Your Garage Door Photo Eye

Adjusting Your Garage Door Photo Eye Phoenix AZ

Today’s garage doors are outfitted with safety precautions. Some of them are part of the leading edge as the garage closes, others are infrared beams which “watch” for people or possessions to be in the garage door’s path.

Today will we talk about the photo eye that controls one type of safety protocol. For the infrared beam to work correctly, the beam must shoot straight at the other sensor and the “eye” must pick up the signal clearly. If they are out of alignment the system will believe there is an vehicle, object, person, or even a pet in the way and it will not close.

These sensors are usually installed about 6 inches off the floor.  If you can’t get your garage to close, there is a chance that the problem is the photo eye. Follow the steps below to get your garage working again.

Photo Eye Adjustment Steps

Step #1 – Knowing your enemy is the biggest part of any repair. Garage doors that will neither open or close are having more problems than misaligned photo eyes. However if your door will not close, or only closes a bit and then retracts, you might check your photo eyes. Some garage doors will not attempt to close if the beam is not hitting right, they might flash a light or make a clicking sound.

Step #2 – Clear the path around the garage door and the sensors. While you would probably notice if the car was hanging out a small item that has fallen in front of the garage door sensor will prevent it from working. In addition if someone has bumped the sensor or something has fallen on it, it will not work correctly.

Step #3 – Check the lights on the sensors. Most sensors will have LED lights installed to help you know their current condition. If one of the sensors light is not on or it is flashing you should try to adjust it. If you aim it just right it should re-establish the connection and allow your garage door to close again. Persistent problems with sensors coming out of adjustment should be looked at by qualified garage door technicians.

Step #4 – Wipe your eyes, or at least clean your sensors. It is easy for rain, dust, or dirt to get onto the lens of your sensors. Using a damp cloth you should wipe the cobwebs, dirt, or dust away from the lens and then ensure they are pointed correctly. This should help you get both LED lights to come on and indicate that they are working properly. There is also a chance that the sun shines into the sensor at certain times of day. If you suspect this, you can have a sun shade installed on your garage door sensor to overcome this problem.

Step #5 – The sensors are installed many times with pivot brackets. These brackets allow the angle of the sensors to be customized and overcome walls or tracks that are out of plumb. If your house is settling or the track has been bent the bracket can be loosened and the sensor pointed back at level to fire directly at the other sensor.

Step #6 – Photo eyes in garage doors should be mounted at exactly the same height. While they might work for a while with a slight difference in height, they will start to have problems over time and be more prone to dysfunction with normal environmental buildup on the sensors.

Step #7 – Checking the wires is the last step in DYI garage door repair. If the wires leading to your sensors are pulled loose or have been frayed you should call for some professional help. Caring for the safety system of your garage door is a job for professionals and you should invest in the safety of you and your family.

Garage Door Photo Eye Service

If you have tried these steps and haven’t been able to get your garage door working, give the experts a call. On Track Garage Door knows all brands and technology to get your garage door back on track. We can help you adjust, repair, or replace damaged photo eye safety sensors on your garage door anywhere in the Phoenix valley. Call today at 480-641-2301.

Garage Door Security

garage-door-security-arizona

The garage is one of the areas of our homes where we keep some of the most valuable possessions we have. The vehicles, sports equipment, treasured belongings, and other items in storage in our garage add up to large sums. Knowing that your property is secure helps you have peace of mind. Garage door security is a simple but overlooked item for many homeowners.  Don’t let your home be unprepared and vulnerable to thieves.

Custom Garage Door Opener Settings

Garage door openers usually come with a factory code. Thieves know this and look for garage doors that still have the original factory codes. Make sure you have a unique code by resetting the garage door system to a frequency or code that is less generic.

Do You Unplug For Vacations?

When you leave for fun in the sun or a trip through the woods disabling your garage door can be a weak point. Smart home owners are happy to unplug their garage door to remove one of the ways that people for access to homes. It might take an extra few steps to go back in the house and reach the plug, but it is well worth the effort in securing your home.

Is Your Remote Safe?

One of the most vulnerable elements of the garage door is who has a remote. The remote is the passport to getting into your garage. This can be a nightmare if your vehicle is unlocked, or the remote is easily visible. It can be easily taken from your car and used to get into your garage. Clearly this is made worse if you have a garage that has access to your home. Most of us don’t lock the door from our garage to the interior of our homes, so keeping track of these remotes is of paramount importance.

Emergency Release Lever Security

The emergency release is an important part of garage door security. The cord or rope that dangles down for emergency situations is important to garage door safety, but can be used to defeat the security measures. With something as simple as a coat hanger some thieves can get a hold of the lever and disengage the garage door opener from the door. Then they are able to open the door manually. Garage door experts recommend removing the cord, or zip tying it up so it is more difficult for would be thieves.

Reinforcing Locks

Garage door locks secure the panels of the garage door from moving on the track. They can’t do their job if the garage door is structurally compromised. This means that the lock itself is in good condition and the rest of the garage door is in good condition. If you want to lock the garage door you should consider reinforcing the hinges and doorjambs. Simply make sure they are tight and secure by tightening up all of the bolts, nuts, and screws.

Garage Door Maintenance

Keeping your house and garage safe is critical for your safety. Having the garage in good repair and having help getting the garage door codes changed can help you have peace of mind while you are home, and most importantly when you are away. If you need to schedule some garage door maintenance, get in touch with the Phoenix valley garage door pros.

Quiet Garage Door Opener Tips

Quiet Garage Door Opener Tips Arizona

Getting up early and heading off to work is a fact of life for a lot of us in Arizona. Part of getting on our way involves getting in the car and opening and closing the garage door. Over time the parts wear down and can start making noise. There are steps you can take to help silence these disturbing noises and let your loved ones continue to rest peacefully. Follow these quite garage door opener tips to knock out the grinding, squeaking, and clanging.

Choosing The Right Opener

There are 3 main types of garage door openers, belt, chain, and jackshaft.  Belt drive garage door openers are by far the quietest of these technologies. Starting out right when building a home, or replacing chain drive garage door openers with belt drive will help control a lot of the noise, and give you a quiet garage door opener.

Fixing A Noisy Garage Door

It isn’t just the opener that can make noise. If you are striving for a quiet garage door some maintenance can be done to help. All of the grinding, squeaking, and rattling can be disturbing to family members who are still sleeping if you work early. There are some simple steps you can take, and there are maintenance issues that you can have a garage door repair company come and help you with. The following are some steps to help silence the garage door opener.

Lubricating The Springs

Torsion springs are the springs that are just over the closed garage door. These are incredibly dangerous and should only be disassembled or worked on by trained garage door technicians. There are also extension springs that are found on either side of the garage door above the upper tracks.

These springs can make a clanging or squeaking sound that can be noisy. To quiet these springs you can use a small amount of motor oil get a spray on metal lubricant. Apply it to the springs and it should help with some of the noise.

Wrench Down All Nuts & Bolts

Grab your socket set or wrench and methodically go through all of the nuts and bolts to re-tighten. Vibrations from daily garage door operation can shake the nuts and bolts loose over time. Sometimes the noise from your garage door is simply loose parts and tightening these areas back down can stop a lot of, or all of the noise.

Replace Hinges

The hinges in your garage door are metal on metal parts. When they become worn then can make grinding and squeaking sounds. As garage doors age the roller stem inside the hinges tend to wear down. You can inspect the roller stems by looking for wear and checking to see if they are loose. Using your fingers you can see if the roller inside the hinge has any side to side play. If there isn’t any play you can add some metal lubricant and it should help quiet any noises.

Roller Replacement

If you are still struggling with noise with your garage door opener you should consider replacing the rollers. The best way to track down noises in your garage door opener is to operate your door and stand close enough to follow the sound.

The rollers in garage doors are made from nylon or metal. If these are worn they can cause a terrible squeaking sound. They should be replaced if you find there is significant wear as you try to track down your noisy garage door issues. The first step can be a good squirt of the metal lubricant. However if that doesn’t last you should consider having your rollers replaced.

This can be a dangerous and difficult repair and should be carried out by trained garage door repair technicians. Nylon rollers are quieter than metal, so if you are replacing these parts you should choose the nylon replacements.

Opener Maintenance

Most of the other solutions have dealt with the track, roller, and spring systems. The garage door opener itself can also cause obnoxious noises and might need some attention. For both chain and belt driven garage door openers a loose garage door can cause noise. Check your owner’s manual or find a copy online to check to see how much tension should be on your trolley mechanism.

For chain driven garage door openers you can use metal lubricant to help all the metal parts slide together with much less noise. There are also certain parts that white grease may be applied. Check your owner’s manual for these breakdowns.

NEVER use lubricant or grease on belt driven garage doors.

Last Line Defense

Even when garage doors are opening flawlessly they can be a bit noisy. This is made worse when garages are made from concrete or brick. The supports that hold up the tracks can resonate, rub, and cause noise against the bare concrete or brick. If you find that this is one of the areas that is still noisy you can add a strip of rubber to help silence the noise in this area.

Garage Door Maintenance

If you have a noisy garage our technicians can help you get the quiet garage door opener you want. The noise from the garage can wake people in the house and annoy neighbors. Taking a few steps to help it run more smoothly and replace worn out parts will help it operate quietly.